Page Comparison

1. To filter the load testing set listing on the Load Testing Sets page, click on the Add Filter dropdown list shown below:Image Removed

...

2. The following options will appear.Image Removed

...

3. Select the the filter you would like to apply on the load testing set  listing and then provide the value for that type of filter and click somewhere else or use Tab on your keyboard. The Load Testing Set listing will get filtered down based on the filter selection. An example of an applied filter is shown below:Image Removed

...

4. To add another filter in addition to the existing one, click on Add Filter dropdown list again and perform the same steps.

5. To remove the effect of only one filter, click the x right next to the filter such as the one shown below. To remove all filters together, you can click the Reset filters icon.

Image Removed

6. If you would like to use the classic filters, click on the icon shown below:

Image Removed

7. To filter the load tests listing on the Load Testing page using classic filter, click on the Add Filter icon shown below:

Image Removed

8. After clicking on the Add Filter link, the following popup window will appear:

Image Removed

9. Select the checkbox next to each type of filter you would like to apply on the Load Testing listing and then provide the value for that type of filter and click on Apply button. The Load Test listing will get filtered down based on the filter selection. An example of an applied filter is shown below:

Image Removed

10. To remove the effect of only one filter, click the x right next to the filter such as the one shown above. To remove all filters together, you can click the Reset button as shown above.

...

the Reset filters link.

...

...

...

...

...

...

...

...

...

...